@article{stolze_determination_2023,
	title = {Determination of the {Bonding} {Strength} of {Finger} {Joints} {Using} a {New} {Test} {Specimen} {Geometry}},
	volume = {0},
	abstract = {In this study, a specimen geometry for testing finger joints was developed using finite element simulation and proofed by experimental testing. Six different wood species and three adhesives were used for finger-jointing specimens. With the test specimen geometry, the bonding strength of the finger joints was determined without the usual self-locking of the joint. Under load, the test specimen geometry introduces maximum stress at the beginning of the bond line (adhesive zone). However, the test specimen geometry does not generate a symmetric stress state. The main difficulty here is the flank angle of the finger joint geometry. The wood species and adhesives significantly influenced the performance of the finger joints.},
	language = {en},
	number = {0},
	journal = {Process},
	author = {Stolze, Hannes and Gurnik, Michael and Kegel, Sebastian and Bollmus, Susanne and Militz, Holger},
	year = {2023},
	file = {Stolze et al. - 2023 - Determination of the Bonding Strength of Finger Jo.pdf:C\:\\Users\\maicher\\Zotero\\storage\\SRKKQCZA\\Stolze et al. - 2023 - Determination of the Bonding Strength of Finger Jo.pdf:application/pdf},
}

In this study, a specimen geometry for testing finger joints was developed using finite element simulation and proofed by experimental testing. Six different wood species and three adhesives were used for finger-jointing specimens. With the test specimen geometry, the bonding strength of the finger joints was determined without the usual self-locking of the joint. Under load, the test specimen geometry introduces maximum stress at the beginning of the bond line (adhesive zone). However, the test specimen geometry does not generate a symmetric stress state. The main difficulty here is the flank angle of the finger joint geometry. The wood species and adhesives significantly influenced the performance of the finger joints.

@article{stolze_non-destructive_2022,
	title = {Non-{Destructive} {Evaluation} of the {Cutting} {Surface} of {Hardwood} {Finger} {Joints}},
	volume = {22},
	copyright = {http://creativecommons.org/licenses/by/3.0/},
	issn = {1424-8220},
	url = {https://www.mdpi.com/1424-8220/22/10/3855},
	doi = {10.3390/s22103855},
	abstract = {In this study, the surface parameters wettability, roughness, and adhesive penetration, which are important for wood bonding, were investigated and evaluated utilizing non-destructive methods after different mechanical processing. For this purpose, beech and birch finger joints were prepared with different cutting combinations (three cutters with different sharpness levels and two feed rates) in an industrial process. Effects and interactions on the surface parameters resulting from the different cutting combinations were evaluated using three Full Factorial Designs. The various cutting parameters had a predominantly significant influence on the surface parameters. The effects and identified interactions highlight the complexity of the cutting surface and the importance of wood bonding. In this respect, a new finding is that with sharper cutters, higher contact angles of the adhesives occur. The methods (contact angle measurement, laser scanning microscopy, and brightfield microscopy) used were well suited to make effects visible and quantifiable, which can be of interest for the quality control of the wood processing industry. The results can help to better understand and evaluate the design of wood surfaces via machining and the bonding of hardwoods. Possibly the results can contribute to further standardizing the production of load-bearing hardwood finger joints and making them more efficient.},
	language = {en},
	number = {10},
	urldate = {2022-05-19},
	journal = {Sensors},
	author = {Stolze, Hannes and Gurnik, Michael and Koddenberg, Tim and Kröger, Jonas and Köhler, Robert and Viöl, Wolfgang and Militz, Holger},
	month = jan,
	year = {2022},
	note = {Number: 10
Publisher: Multidisciplinary Digital Publishing Institute},
	keywords = {wettability, hardwood, roughness, non-destructive evaluation, adhesive penetration, cutting surface, finger-jointing, wood characterization},
	pages = {3855},
	file = {Full Text PDF:C\:\\Users\\maicher\\Zotero\\storage\\H4WWF56G\\Stolze et al. - 2022 - Non-Destructive Evaluation of the Cutting Surface .pdf:application/pdf;sensors-22-03855.pdf:C\:\\Users\\maicher\\Zotero\\storage\\J6S2BUM3\\sensors-22-03855.pdf:application/pdf},
}

In this study, the surface parameters wettability, roughness, and adhesive penetration, which are important for wood bonding, were investigated and evaluated utilizing non-destructive methods after different mechanical processing. For this purpose, beech and birch finger joints were prepared with different cutting combinations (three cutters with different sharpness levels and two feed rates) in an industrial process. Effects and interactions on the surface parameters resulting from the different cutting combinations were evaluated using three Full Factorial Designs. The various cutting parameters had a predominantly significant influence on the surface parameters. The effects and identified interactions highlight the complexity of the cutting surface and the importance of wood bonding. In this respect, a new finding is that with sharper cutters, higher contact angles of the adhesives occur. The methods (contact angle measurement, laser scanning microscopy, and brightfield microscopy) used were well suited to make effects visible and quantifiable, which can be of interest for the quality control of the wood processing industry. The results can help to better understand and evaluate the design of wood surfaces via machining and the bonding of hardwoods. Possibly the results can contribute to further standardizing the production of load-bearing hardwood finger joints and making them more efficient.